High-Precision Lightning-Ignited Fire Locator
Lightning Monitoring and Fire Location Device

LD-3

High-Precision Lightning-Ignited Fire Locator

Detect lightning precisely and locate ignition risk rapidly

The LD-3 High-Precision Lightning-Ignited Fire Locator is a fully automatic intelligent lightning detection device. It monitors the time, position and intensity of lightning events as well as thunderstorm location and movement. Using very-low-frequency lightning electromagnetic pulses, orthogonal magnetic-field antennas, electric-field polarity and time-difference positioning, it supplies essential data for monitoring lightning-ignited forest fires.

300km Maximum Detection Range
±0.5° Direction-Finding Accuracy
<300m Network Location Accuracy
≤0.1μs Clock Synchronization Accuracy

CORE CAPABILITIES

Detect lightning precisely and locate ignition risk rapidly

01

Full-Waveform 3D Lightning Detection

Lightning electromagnetic pulses are captured and combined with orthogonal magnetic-field antennas, electric-field polarity and arrival-time differences for automatic event detection and location.

02

High-Precision Networked Location

At least three stations can participate in positioning, while a typical monitoring network uses four or more devices and achieves location accuracy better than 300 metres.

03

Lightning-Fire Identification

Lightning time, position, intensity and thunderstorm movement data provide the foundation for identifying and responding to lightning-ignited forest-fire risks.

04

Remote Operation and Intelligent Warning

BeiDou high-precision timing, remote parameter configuration, waveform extraction and lightning-energy detection support unattended, continuous monitoring.

TECHNICAL DATA

Full Specifications

Maximum Detection Range 300 km
Direction-Finding Accuracy ±0.5°
Network Location Accuracy Better than 300 m
Return-Stroke Time Resolution ≤1 ms
Clock Synchronization Accuracy ≤0.1 μs
Communication Rate 1200–9600 bps
Network Requirement At least 3 stations for location; typically 4 or more devices
Station Spacing Approx. 20–150 km
Power Supply AC 220 V (±10%), 50 Hz (±2 Hz)
Power Consumption ≤15 W
MTBF ≥5000 h
MTTR ≤30 min
Independent Grounding Resistance <5 Ω
Operating Temperature -30°C to +65°C
Operating Humidity 0–100%
Storage Temperature -45°C to +70°C
Storage Humidity 0–100%
Wind Resistance Up to Level 12
Environmental Protection Moisture / mould / salt-fog resistance
Installation Height 940 mm from the lower edge of the antenna cover through the support and power enclosure
Near-Field Clearance No obstruction within 30 m
Far-Field Clearance No obstruction above a 15° elevation angle beyond 30 m

DOWNLOADS

Downloads

Downloads will be enabled when approved brochures are available.

Want to learn more about this product?

Contact us for product solutions, application guidance and technical materials.

Contact Us